Wonder Smart
KNX curtain motor WS-CM-KNX, 1.2 N·m, 100–240 V AC
SKU: WS-CM-KNX
- KNX
- 1.2 N·m
- 50 kg
- IP20
KNX curtain track motor with hand-pull start, obstacle stop and position feedback. 1.2 N·m, curtains up to 50 kg on tracks up to 12 m, 33 dB. Supplied with the track gearbox; optional 433 MHz RF remote.
Description
Mains-powered curtain track motor with a built-in KNX TP interface. It reports position, direction and end positions over KNX and can also be operated from an optional 433 MHz RF remote.
- Hand-pull start: a gentle pull of about 5 cm starts the motor in that direction
- Manual operation during power failure, like a conventional curtain
- Obstacle detection: stops automatically when it meets resistance
- Automatic end-position learning and fabric rebound correction
- Position recovery after the curtain is moved while unpowered
- 8 scenes per channel; wind, rain and frost alarms; blocking functions
Package contents
- KNX curtain motor
- Track gearbox: holds the drive belt and mounts the motor to the track
For flat (track) curtains, indoor use only. Commissioning in ETS; the ETS application is available from Wonder Smart.
Key specifications
- Rated torque
- 1.2 N·m
- Maximum curtain load
- 50 kg
- Protocol
- KNX TP
- Track length
- 0.9–12 m
- Travel speed
- 14 cm/s
- Supply voltage
- 100–240 V AC, 50/60 Hz
- Rated motor power
- 45 W
- KNX bus voltage
- 21–30 V DC
- Bus current consumption
- < 5 mA
- Control interfaces
- KNX, 433 MHz RF remote (optional)
- Channels
- 1 curtain channel
- Feedback
- Position 0–100 %, direction, end positions
- Noise level
- 33 dB
- Rated continuous run time
- 4 min
- Dimensions (L × W × H)
- 245 × 51 × 71 mm
- Ingress protection
- IP20, indoor use only
- Operating temperature
- -10 to +55 °C
- Commissioning
- ETS, physical address via PRG button
- Package contents
- Motor, track gearbox
Documents
- Datasheet Datasheet
- Installation and KNX manual Installation manual