Wonder Smart

DALI-2 DT8 tunable white LED driver 240 W, 24 V constant voltage, IP20

SKU: WS-DT8-CV240

Two-channel tunable white LED driver for 24 V LED strip, 240 W, controlled by DALI-2 (DT6/DT8) or push-buttons (Push DIM / Push CCT). Constant power keeps brightness steady while the colour temperature changes. 5-year warranty.

Description

Constant-voltage tunable white LED driver for 24 V LED strip with two outputs (warm and cool white). It is controlled over DALI-2 (device type 6 or 8) or with two momentary push-buttons: Push DIM for brightness and Push CCT for colour temperature.

  • Dimming range 0–100 %, down to 0.01 %
  • Constant power design: brightness stays the same while the colour temperature is adjusted; the total load of both channels is held at 240 W
  • DALI address, groups, scenes and PWM frequency set over NFC with the app
  • Soft-on and fade-in dimming; flicker-free to IEEE 1789 (high-frequency exemption level)
  • Input 220–240 V AC, PF > 0.99, THD ≤ 5 %, efficiency 94 %
  • Networked standby < 0.5 W (EU ErP)
  • Overheat, overvoltage, overload and short-circuit protection with automatic recovery
  • 5-year warranty

Application note

For LED strip with resistor current limiting. LED fixtures with a built-in constant-current IC draw a much higher inrush current and can trip the overload protection.

Key specifications

Protocol
DALI-2
Rated power
240 W
Output voltage
24 V DC
Output mode
Constant voltage (CV)
Dimming
DALI DT6, DALI DT8, Push DIM
Ingress protection
IP20
Warranty
5 years
Output current
Max 10 A
Output channels
2 (warm white, cool white)
Input voltage
220–240 V AC, 50/60 Hz
Dimming interface
DALI-2, Push DIM, Push CCT
Dimming range
0–100 %, down to 0.01 %
Configuration
NFC, via app
PWM frequency
3600 Hz default, 300–22000 Hz via NFC
Dimensions (L × W × H)
380 × 49.5 × 30 mm
Power factor
> 0.99 at 230 V AC, full load
THD
≤ 5 % at 230 V AC, full load
Efficiency
94 %
Ambient temperature
-20 to +45 °C
Case temperature (tc)
86 °C
Flicker
Flicker-free to IEEE 1789
Safety standards
IEC/EN 61347-1, IEC/EN 61347-2-13

Documents