Wonder Smart
DALI-2 DT8 and DMX512 RGBW LED driver 150 W, 24 V constant voltage, IP20
SKU: WS-RGBW-150
- DALI-2, DMX512
- 150 W
- 24 V DC
- IP20
Four-channel RGBW LED driver for 24 V LED strip, 150 W, controlled by DMX512/RDM, DALI-2 (DT8) or a push-button. 5-year warranty.
Description
Constant-voltage RGBW LED driver for 24 V LED strip with four outputs (red, green, blue, white). It is controlled over DMX512 with RDM, DALI-2 (device type 8) or a momentary push-button.
- Dimming range 0–100 %, down to 0.1 %
- Isolated control signal input
- Flicker-free to IEEE 1789 (high-frequency exemption level)
- Input 220–240 V AC, PF > 0.98, THD < 6 %, efficiency 93 %
- Standby power < 0.5 W (EU ErP)
- Overheat, overvoltage, overload and short-circuit protection with automatic recovery
- 5-year warranty
Application note
For LED strip with resistor current limiting. LED fixtures with a built-in constant-current IC draw a much higher inrush current and can trip the overload protection.
Key specifications
- Rated power
- 150 W
- Output voltage
- 24 V DC
- Output mode
- Constant voltage (CV)
- Dimming
- DALI DT8, DMX512
- Ingress protection
- IP20
- Warranty
- 5 years
- Protocol
- DMX512/RDM, DALI-2 (DT8)
- Output current
- Max 6.25 A (1.56 A × 4 channels)
- Output channels
- 4 (R, G, B, W)
- Input voltage
- 220–240 V AC, 50/60 Hz
- Dimming interface
- DMX512/RDM, DALI-2, Push W / Push RGB
- Dimming range
- 0–100 %, down to 0.1 %
- PWM frequency
- 3600 Hz
- Dimensions (L × W × H)
- 352 × 43 × 30 mm
- Power factor
- > 0.98 at 230 V AC, full load
- THD
- < 6 % at 230 V AC, full load
- Efficiency
- 93 %
- Ambient temperature
- -20 to +50 °C
- Case temperature (tc)
- 85 °C
- Flicker
- Flicker-free to IEEE 1789
- Safety standards
- EN 61347-1, EN 61347-2-13
Documents
- Datasheet and installation Installation manual